The button needs to be able to pair with alexa/google just like the motion sensor.
It would be way more useful if it was able to pair with alexa/google through the bridge like the motion sensor is able to.
I think all ZB components should be able to pair with Alexa and create routines not only status.
it is hot requested feature in the market. Once you have it - you be NO#1 in the Smart home IOT industry.
Access with SNZB-01 required.
Using SNZB-03 Motion Sensor - this currently displays in Amazon as a Trigger item "Motion ON" allowing Alexa 'Routines' to be configured from here to operate other items.
The SNZB-01 Switch doesn't show up in Alexa.
Using this with the Sonoff Zigbee Bridge.
Best Case Option. A single Item showing up with the 3 behaviours to chose as triggers. Single Click, Double Click, LongPress.
Alternativly just Single/Double acting as 'On/Off' behaviour would provide improved behaviour.
Or even a worst case '3' devices for each action?
Integrating beyond the Sonoff eco-system would extend the use of these devices massively.
Currently the Sonoff sytem will prove to be expensive.
eWeLink IFTTT integration £7.50GBP per year - this only provides access to the IFTTT integration with very poor /useless applets available. And none for dual service behaviour.
IFTTT £4.30GBP per MONTH, to allow for custom applet designs where you can integrate the eWeLink service with other devices and even external service devices.
Using this approach I was able to operate a "Smart Life/ LampUX" bulb and a "Lifx Bulk" using your button.
However, this actually used all 3 'free' applets and will require a subscription to get any use out of the other switches purchased.
So ALEXA please!
It`s really frustrating that snzb-01 is not detected in alexa even using the ZBBridge. I`ve got it displayed in alexa using 4th gen echo, but it only showed disconnected state. Please fix this!!