Start a new topic

Zigbee SNZ-02 problems

The thermometer shows the temperature with an accuracy of one tenth. Why can't we use that in scenes. We can only use full celsius degree. I need more accuracy in scenes.

I have the impression that when the temperature rises slowly, the SNZ-02 refreshes itself once every 20 minutes. It shows fe. 21.1 for half an hour then 21.9. It newer indicates 21.1, 21.2, 21.3 ......22,9

Because of that some scenes with SNZ02 doesn't work properly.

By the way, duration time in scenes doesn't work properly!!!

3 people have this problem

I have the same problem with setting the temperature in scenes.

Zigbee SNZ-02 problems

works ok in 24 hour mode

defined time will not execute the output

duration time in scenes doesn't work properly!!!

Zigbee temperature timing issue

Does the SNZB-02 also work with the Sonoff RF Bridge WiFi 433MHz?

No it is not possible. SonOff Zigbee HUB is required.


thanks for the very quick response and reply. Have a nice day.

My 3 SZ02's stay connected to the SZ bridge for short periods of time, 1 - 2 hours. The more recent firmware upgrade has extended that for up to 10 hours after which the hub must be restarted. 1.4.0

Some people are confusing resolution with accuracy
Login or Signup to post a comment