Start a new topic

Wiring help

I bought a 3 gang T0EU3C to replace a 3 gang switch.

The wiring in my home don't have a neutral cable. And the previous switch was connected according to the hand-drawn picture. (Sorry about the quality, not a Picasso ).

I tried to connect the T0EU3C and fed live wire in the Lin and 3 bulbs in the out connections.

I also connected the other half of the live wire completing the circuit to live into the Nin.

By doing so nothing was working. Then I connected live from neutral to one of the OUT connection. By doing so the board came to life and I was able to turn on/off two out of three lights but when I turn on the light which is connected to neutral the circuit breaks and everything gets reset. Also, the very same light is flickering.

Any solution.

Login or Signup to post a comment