Start a new topic

HT 16 not working in Auto mode with decimal

Device with new firmware now reports temperature with decimal but eWlink dose not work with decimal places when seated in auto mode as you can see in the image.

3 people have this problem

Yes same for me, could you please fix this and let auto mode trigger ON/OFF taking into consideration also decimal values?


Example: 

set in AUTO configuration that:    >19.2° switch ON   and   <19.2° switch OFF

If temperature reach 19.3° it should switch ON and when temperature reach 19.1° it should switch OFF


Thanks


2 people like this

Yes please. here too. Just set up a TH10 with probe to control another R3 to switch on a contactor.


It shows decimal 0.1 but does not react to the changes in these increments.


1 person likes this
Login or Signup to post a comment