I did try the location service with no joy before pairing with an older IOS device.
So i dont think unless i done it wrong the location service fix is a fix?
I had paired with several Sonoff switches prior to my update to iOS 13.x - I updated to 13.x a couple of weeks ago and (coincidentally) I received an RF Bridge that refuses to pair, even in compatibility mode. Once I get to the step that has you add the network name (SSID) and password, the ewelink app shows an SSID of 'WiFi' that cannot be changed, therefore it can never connect to my actual wifi SSID. Federico - are these your symptoms?
Thanks, Federico - I just found that thread and was able to pair but ONLY in compatibility mode. And I had to type in the SSID, there was no scrollable list (like I think I remember from pairing attempts with other devices). Cheers.
I've had this happen to me twice now - each time the solution was to disable/re-enable location services, then reboot my phone, then immediately perform the pairing. Rebooting seemed to be key.
New sonoff mini device, I tried to pair with an iPhone running iOS 13.2 and I only could pair with a older android tablet.
Quick Fix (iOS 13 Pair issues with Sonoff 4CH Pro):
Step 1. Ensure that your account with eWelink is properly setup and running
Step 2. Install eWelink on an Android phone (borrow from a friend if you dont have)
Step 3. Download eWelink on the Android phone and sign-in with your login details from step 1
Step 3. At this point, follow the screen setup on the android phone to complete the setup.
Step 4. On your iPhone, login using same details as in Step 1
step 5. Refresh Your screen on the iPhone by pulling down as usual and there seats your added device.
1. Deleting the app on the Android phone after the setup will not affect the functionality of your device.
2. You will have total control on the iPhone afterwards.
This approach worked for me after 5 devices has been ordered, shipped via DHL Express (China to Nigeria) and 7 solid hours of trial/error.
I hope it solves your challenge with the device.
@Robert Band I've all the most recent versions at the current date (iOS and eWelink app). I didn't enable the location services but now I don't need to pair the device because I used an Android device to pair. Maybe next time I can try your suggestion
Same here, enabling location services made no difference.
Very lucky then I guess. I've tried 3 different Sonoff devices.
I have a few more devices on the way so will give it another go.
I tried to pair a sonoff with an Iphone x with IOS 13.3.1 it doesn't pair, then I tried to download the new IOS 13.4, I tried the pairing again, nothing to do. So I tryed again with an Iphone SE with IOS 13.3.1...it's works!!!