When I turn on using IFTTT then the corresponding "1 Channel Switch turned on or off" in IFTTT is not triggered. If I however switch on via ewelink app then the "1 Channel Switch turned on or off" is triggered.
Please make it work so that when using IFTTT "Turn 1 Channel Switch on or off" then the corresponding "1 Channel Switch turned on or off" is triggered in IFTTT.
I have an IFTTT applet that is triggered by one channel of a 4-channel switch. If I change the switch status either from the Ewelink app or by pressing the button on the switch then the applet is triggered. But if I change the switch status from IFTTT using a webhook then the applet is not triggered.
Is this a recognised feature or defect?