I have a TH10 controlling my water heater.
- I'm using a temp sensor to monitor water temperature
- I have set daily schedule to turn the heater on every morning for 30' and evening for another 15'
This schedule brings the water to 45C in the morning and warms it up again in the evening.
I need an OR function for the schedule. i.e. if the water has not been used and the temp is 45C don't turn on in the evening.
Or if the water is luke warm don't stay on for 30' in the morning but until you reach 45C. Otherwise the heater internal temp switch is set for 65C and that means wasted electricity.
The Auto function in eWeLink cannot do the above at the moment. Can you please add this function?