Start a new topic

addition of terminals to facilitate addition of pulsed interrupter

to use sonoff in parallel with a switch the solution I developed was to solder 2 wires at the sonoff button's terminals and use pulsating switches.

so I can use the sleepof the app and a convetional switch, but tinning in those terminals is very bad and can damage the equipment.

on sonoff basic v3 could put 2 terminals next to the button to facilitate this function

(262 KB)
(270 KB)

2 people like this idea
1 Comment

Yes, ideally a couple of pads to solder either the cables or a 2 pin header.

Login or Signup to post a comment