eWeLink What's New for Android 3.5.6

Release Date: 2018-12-06

What's New:

1.Fix some bugs

2.Optimize performance and improve stability.

2 people like this

After Ewelink last update (3.5.6 , december 5) all devices do not show the actual status the Sonoff TH device have a block temperature and no detection (Example: at home there are 16 degrees and they are stop at the last detection at 20 degrees - the lights with the timer turn on and off but remains on the Ewelink app with the last state recording). All device have last update on board (2.6 or 2.7).

The same problems here. The temperature is "frozen/stuck" on a not actual value. I can't change status. There is no history available.

after the update to version 3.5.6 all my devices (POW R2 and S26) do not show the on / off state if these states have been changed by the schedule tasks. I can not remove scheduled tasks by showing the "failed, please check network connectivity and try again later". All devices have the latest firmware version.

1 person likes this
It seems that log-off & log-on does update the status. Just need a bit of testing to see if it stays that way or freezes again.

done, everything works fine after logoff and logon. thank you.

1 person likes this

THANK YOU for now showing the MAC address of each device.  I would have probably put it under (I)information instead of the settings but at least it is in there!

Still no firmware update for all devices to 2.6 like sonoff touch EUC1 stuck at 1.8.1

1 person likes this
After uppdate hard and long time to login again, but then is works fine.

I spoke too soon in thanking you for including the MAC address in this version.  The MAC address reported in the app is not the wifi MAC.  It does NOT agree with the MAC address shown by a router.  It is essentially useless for purposes of identifying the device on the wifi network.  PLEASE FIX THIS.

2 people like this
Can you please rename 'Alarm' to 'Trigger' - many users are using this function to allow rf remote switches to trigger non-rf sockets and lights. Better still, allow alarms/triggers to act as inputs in IFTT...

On Google Play you stated "3.Blocked inching and all on/all off on some devices". Can you be more specific ? On which devices and why ?

Also when stating "1. Launched support for Zigbee devices" can you specify which one ? For example Xiaomi ?

problem with wifi pairing

problem with wifi pairing

Login or Signup to post a comment