Start a new topic

Slave a group of seitches

I have been using a group of T1 switches to operate a two gang lighting circuit. This is where two separate switches operate a single light. I also use a wall switch to operate a lamp. Since I want to operate the lamps from both switches, it means I need to use four slots in the scenes. e.g. Switch #1 off - turn Switch #2 off Switch #1 on- turn Switch #2 on Switch #2 off - turn Switch #1 off Switch #2 on - turn Switch #1 on The feature request is to allow groups of switches to be matched to a new state when one of the switches in the group changes state. The limit of 21 scenes seems low. If I had two switches I get 21 scenes. If I had 20 switches I still only get 21... this doesn’t reward customers.

1 person likes this idea
Login or Signup to post a comment