I have a situation where I would like a pair switches, one at each end of a room, that control the same light.
Is it possible to pair these two physical switches so they have joined function?
It would also be useful if the power switching was handled by one switch to minimise the amount of wiring. I appreciate that both switches will require L + N connection.
I am new to 'Scenes' does the phone running the ewelink app need to be connected to local wifi/gsm for the rule to be active?
I have found a similar solution using IFTTT, but this seem rather elongated.
Do I create a scene in the ewelink app?
I like the sounds of you solution EB - cannot beat having a local server, with no dependency on anyone else. I have recently built a HASSIO brew of raspberry pi, I would be interested to know where I get hold of the custom firmware for the switches? Are the switches essentially ESP 8266's?
Another solution here would be to have the switches not only talking to WiFi, but interconnected using RC.
Hi, you can achieve this by purchasing a Sonoff RF and 2 Wall Touch RF controllers. Each Sonoff RF can pair with up to 4 self adhesive wall switches. This way controlling your lights from the 2 ends of a stairway, up to 4 entrances of a room or a corridor.
Hope this helps.
Have you had any response to your query?
Being able to pair multiple codes is a really basic requirement that all $10 garage controllers have but yet it seems to be completely ignored by Itead and all previous queries have been ignored or simply closed when unanswered.