If a Sonoff plug is going to have any hope at all of getting approved for use in Australia or New Zealand we need the mains plug to be changed to insulated Active and Neutral pins, as per Australian Standards AS/NZS3112:2000 and AS/NZS3112:2004, 3rd April 2005.
Not sure why you aren't using insulated pins by default, it must be harder to source uninsulated nowadays?!
Lee Mulvogue
If a Sonoff plug is going to have any hope at all of getting approved for use in Australia or New Zealand we need the mains plug to be changed to insulated Active and Neutral pins, as per Australian Standards AS/NZS3112:2000 and AS/NZS3112:2004, 3rd April 2005.
Not sure why you aren't using insulated pins by default, it must be harder to source uninsulated nowadays?!
Reference photo:
https://upload.wikimedia.org/wikipedia/commons/thumb/2/20/Aust_AC_plug.jpg/150px-Aust_AC_plug.jpg
Would also be good if a blanking plate were available to seal off the "international" parts of the socket.