+1 definitely good idea
@Kat
Imagine having a hot tub with various pumps, heaters and electronic items controlled by Sonoffs. As in the above example, the Auto Cooling scene shuts off the heater at 40°. But to change that, I have to navigate into the scene settings and alter the trigger temp setting.
In my ideal world I'd have multiple scenes, where only one is active at a time. One would activate at 35° for an 'away mode' where I won't be using it for a few days, conserving power. Another would be warmer, say 41°.
+1 Good suggestion
Hello,
First time poster. +1 this as a great suggestion. I have setup some scenes to control my Central Heating/Cooling using TH10 to monitor areas of the house and 12v 1 Channel Inching switches to trigger heating/cooling and dampers(zones) in those areas.
Perhaps having the option to add the enable/disable button (as mentioned above) in the scene setup would work? This may not be needed in all cases but would be a handy feature to be able to manually disable a scene when needed.
Thanks.
I think is a good idea and is necessary if you want build a alarm system. In this way you can disable allarm before entering the building and enable when you exit.
Quote!!
Thank you.
Agree this would open up alot more capabilities. Any hope for this feature to be added? Personally I neeeeed it for the hot tub controller I made up from Sonoff pieces.
CoryV
I'd love to see an 'on/off' switch for individual Scenes. I have a setup that utilizes a TH10's temp sensor to trigger actions by other switches. I'd like to be able to enable and disable some settings without clicking into each scene and manually change the temp trigger degree.
I made a mockup image attached here.
8 people like this idea