I have a Slampher RF and Wall touch switches that I was not able to configure.
I pressed the button as per instruction sheet and got it to "blink 3 times" mode, but it did not proceed to configure.
What I found worked was
1) press button for 5-7 seconds to put into "blink 3 times" mode
2) release
3) hold again for 5 seconds
- The ITEAD SSID was then advertised and I coudl connect using the AP configuration option.
HTH
Damien
I have a Slampher RF and Wall touch switches that I was not able to configure.
I pressed the button as per instruction sheet and got it to "blink 3 times" mode, but it did not proceed to configure.
What I found worked was
1) press button for 5-7 seconds to put into "blink 3 times" mode
2) release
3) hold again for 5 seconds
- The ITEAD SSID was then advertised and I coudl connect using the AP configuration option.
HTH