If you setup an Alarm on the RF Bridge from a device such as a Magnetic Door sensor or PIR, or even configure a button as an alarm, and then setup a scene using that alarm as the trigger, the scene never runs even though the alarm is triggered.
my scenes worked for monthes... But they suddently stopped working yesterday. Any solution ?
I think using this device for having an alarm at home against thiefs... It is not a good idea...
You need alimentation at home, internet connection and the most important thing : An ITEAD/SONOFF servers availables, not saturated, linked all the time... It's a toy for geeks !
If you jailbreak all sonoff devices (Basics, TH10/16, POW, S20 etc.. and RF BRIDGE) and flash with a new open source firmware... perhaps you do something with..
But here It is not easly if you are not a good geek and electronician...
Mine is working now too - thanks for letting us know.
I'm having the exact same problem. I do receive the alerts but the scene never gets triggered.