Start a new topic

Scene using Alarm as trigger not working

If you setup an Alarm on the RF Bridge from a device such as a Magnetic Door sensor or PIR, or even configure a button as an alarm, and then setup a scene using that alarm as the trigger, the scene never runs even though the alarm is triggered.

2 people have this problem


I'm having the exact same problem. I do receive the alerts but the scene never gets triggered.

I am having the same issue. 


I think ‘scenes’ are broken till Friday. Have a look at the IFTTT not working thread for details.
My scene started working this morning! :-)


Mine is working now too - thanks for letting us know.

My scene stopped working again.  No idea why.


I only have a very simple scene; one light turning on two others. It is working (U.K.) I want to design some better ones but my RF Bridge isn’t working.

I think using this device for having an alarm at home against thiefs... It is not a good idea...

You need alimentation at home, internet connection and the most important thing : An ITEAD/SONOFF servers availables, not saturated, linked all the time... It's a toy for geeks !

If you jailbreak all sonoff devices (Basics, TH10/16, POW, S20 etc.. and RF BRIDGE) and flash with a new open source firmware... perhaps you do something with..

But here It is not easly if you are not a good geek and electronician...

my scenes worked for monthes... But they suddently stopped working yesterday. Any solution ?

Login or Signup to post a comment