Did you ever find a solution to this problem i am having the same issue.
I have the same problem. I analyzed it a bit and came to the following conclusion. I have a device A which also triggers devices B, C and D. I created a scene that when device A is turned on, the devices B, C and D will also turn on. Now I manually turn one of the devices B, C or D off. I wait some period of time (varying from several minutes up to one hour) and the devices B, C and D will automatically turn on. When I look into the history log, I can see that the scene keeps repeating (varying from once in several minutes up to one hour). This is not what I expect of a TRIGGER. Please release and update to fix this, because I can imagine that a whole lot of users experience the same kind of problems.
Auto scene were setup and working fine, stopped working after several updates, eta on fix here
i have this problem also, please fix it!
I also have the same problem. Existing scenes are working but I cannot add or edit any. I just get ""Operation failed, Please check network connectivity". Everything else works.
I have the same issue on all devices using this app. I cannot change or edit scenes. I get the "Operation failed, Please check network connectivity".
mine suddenly works on its own. unsure why and what reason
I am having same issue. Scene suddenly stop working all of them, after I tried IFTT. Disappointing.
Hi., I have the same provlem. That I do to solve it, is to go to the main page in the phone aplication, select LAN MODE, turn ir on ans then off.. most of the time is a fix for a few minutes.
I have a strange problem. I own T0 wall switches, and some S31 Smart Plug, and a few Basicr2 smart switches. I intall all of then and have no issue al all. The T0 are 3 bottons, and in some of them, I use 1 botton to trigger some auto scene to turn on or off a smart Plug or a smart switch. From day one this have work perfect. Then out of knowere, stop working that way. The cell aplication can turn on and of the wall swiches, smart plugs o smart switches, on and off. I can even run a manual scene, and no problem. But the wall plate and the other devices stop working the way intended. Also, I have a lot of "failure to conect", a lot more. Any ideas?