Hi I received yesterday a Sonoff Slampher WiFi Smart Light Bulb Holder.
I succesfully installed it and paired it with the latest (3.0.0) eWeLink Android app. I have not paired any RF controller with it. I have the following problem: The device auto switches to on every minute by iteself. On the history on the app it shows "State:On, Time:x, Source:Device". I tried multiple times to delete and pair it again with no result. I even turn on the loop timer in order to switch it off every 5 minutes. It keeps on auto-switches to on state (if it is off) every minute.
Anyone having the same problem? Any feedback?
so it is not a voltage issue
it seems that is a problem with the Slampher or it may has to do with the electrical grid. I use the Slamphers in a 220V-230V / 50Hz grid. What about the others that are facing the same problem?
I have similar problem with Slampher ..two on the same line in the bedroom (router in same room).Sometimes both,sometimes only one turn On or Off by itself . Tried to delete from the app,pair again but no luck .Other two Sonoff basic working fine .
I just found time and flashed espurna. Great firmware. Unfortunately it still has the same problem. It may be a problem with the frequency or something like that. I am getting rid of them.
When I looked into the eWeLink app, the device are not even called the same (I attach the screenshot of both in previous post after several attempt ;-).
The old one (which works) is called Slampher RF_R2. The new one (the glitchy one) is called Slampher_R2.
So Sonoff must be aware of this and do something about it (if they can't fix the firmware they should replace the faulty ones with the old standard).
sorry, had an issue with previous attachment. Let's see if this works better!
Not really. I think it has to do with a problematic batch. Also it may be that this is there are two version (hardware of the device). Both of mine are the second version.
The replacement arrived and it behaved exactly the same. I got mine from banggood.
I am planning on flashing a custom firmware, but did not have the time up to now.
BTW I opened a case with ITEAD and they are the ones who told me to ask for a replacement device. When I test the new one I will post with the results.