Apologies -- posted this in the wrong forum to begin with. Admins, please go ahead and delete the other one.
I just received two Sonoff TH16s, and can't pair either of them. I put them into pairing mode (power them up, long press on the button until the three flashes) but I can't see a WiFi network from either of them to connect my Android phone to.
I've searched for the networks on multiple Android devices (and a laptop), and I've installed a WiFi analyser app to see if it shows up on the spectrum somewhere. But neither appear on there, either.
I'd put it down as a faulty unit, but given that both TH16s are doing the same thing, it makes me wonder if I'm missing something.
I also have two Sonoff Wifi Smart Switches, and paired both of those just fine, and they're working nicely in the app.
Any advice? Thanks!
Hey ITEAD, I love your devices and have practically all of your sonoff series, the POW, TH10, 4 CH, and now the TH16. I have 2 new TH16's but neither of them can pair to my networks.
They are both new, I'm very familiar with ewelink and am using at least 25 other Sonoff devices including your IR 433 bridge all very sucessfully.
So I'm familiar with the pairing procedures and both TH16's 8 Temperature ( 1 waterproof, 1 indoor ) can be found for pairing, but after they are registered the blue light just keeps blinking instead of staying on which is what happens when the pairing is successful.
In the ewelink app they are registered but as "offline".
I have tried your suggestion above ( press the connection button straight after the power is connected ), but this does not seem to make a difference. My ewelink finds the 2 devices and registers them but then they don't appear to be able to connection themselves to my wifi as all my other sonoff devices do.
I have tried connecting directly to me routers wifi ( Fritzbox ) and over a repeater but neither works.
Any suggestion are very welcome and I'd love to get the temperature sensors going in my environment.
I already have the IR Bridge working with a motion sensor ( PIR ) and that works very well turning on my
kitchen lights !
I have looked at a diagnostic help
and my light blinks 2 times quickly then repeats. According to the information this means my
TH16 does connect to my local wifi but cannot connection to the ITLEAD server so this would
seem to be a Server side problem they need to fix.
Something has changed causing this problem only with the TH16 but no other sonoff devices
I have since added other sonoff devices and they work fine. So its an issue only with the TH16
Hi David - like you have a broad range of Sonoff products. I have the same problem as you trying to commission both a POW and TH16. Have managed to set up a DIY without problem.
My older POW and TH16 units all still work fine.
Awaiting solution from Itead - disappointing no reply from Itead to the many users reporting this issue.
Have had a response from Itead on http://support.iteadstudio.com/support/tickets/62813
Have also reported via feedback on the ewelink as they have advised.
THE SOLUTION IS:
Substitude IP address of eu-disp.coolkit.cc to 184.108.40.206
Right now for some reason current eu-disp.coolkit.cc IP doesn't accept connection to 8081 port, but the old one - does. You can check it by:
telnet 220.127.116.11 8081
telnet 18.104.22.168 8081
Here is an example how to make a substitution in Mikrotik router:
Get to "IP > DNS" menu
Click on "Static"
Click on "+" (add static DNS entry)
Regexp: <leave empty>
TTL: <leave by default [1d 00:00:00]>
Click on "OK"
Close the DNS Static subwindow
Click on "Apply"
Profit! Now your POW is online!