Start a new topic

T1 2 gang and a sonoff basic

Sorry if it has been covered here before. Just not sure what to search for. In my room I have 1 1 gang normal light switch and what I'm thinking about doing is installing a 2 gang T1 and using one gang to control the ceiling light and the spare gang to control a sonoff basic connect to a lamp. Is this possible? Thanks

Dave, I've previously seen a post somewhere on here about this and as far as I remember it WAS possible. I'm assuming a 2 gang T1 will just need the one neutral wire supplying it with a constant feed of power (even if it doesn't you should have a neutral on each gang feed in).  I assume you'd set a scene...if condition is master device T1 2nd gang "on" then perform sonoff basic (eg table lamp) "on", and vice versa for off. T1 1st gang would just be to your normal ceiling light.


Please note...the above info is all theoretical and should not be relied upon whatsoever!!


Hope this helps!

That was I was thinking, Thanks for the reply

It should work. I tested similar scenario. Have you implemented it ?

Thanks, I'm currently waiting for the parts to arrive.
Login or Signup to post a comment